Engineering Update Institute

Registration Fees and Form

   

There are 15 lessons.

You may register for one, or some, or all 15 lessons as you choose. Although the lessons are tabulated according to "recommended", you may select any of the 15 lessons.

Each lesson consists of two 90-minute DVD's (a total of 3 hours per lesson) AND a manual.

PLUS Unlimited access to the instructor at no additional charge (included in your registration fee)
either by phone or by email (student's choice) to answer questions, clarifications, or explanations as needed.

The DVD's and Manuals are yours to keep permanently.

At the end of this page you will see the Registration Fees and the Shipping/Handling charges.


  • We usually ship within 72 hours of receipt of your order. You will receive a confirmation of your order automatically when you click on Send. You can print it for your records.

    If you prefer you can also order by phone at 1-847-309-5864 or by US mail: Engineering Update Institute, 8N173 Ickenham Lane, Plato Center, IL 60124.

    Make your selection(s) by clicking on the box in the Choice column, complete EUI's SECURE Order Form Below, and click on Send.

    E-327 General Engineering Review

                                   Recommended for:

    Lesson
    Choices    		 Subject Topics Chemical Civil Electrical Environmental Industrial Mechanical Other
    #1 Mathematics 1 Analytic Geometry, Trigonometry,
    Algebra, Linear Algebra, Matrices     		X X X X X X X
    #2 Mathematics 2 Probability
    Statistics     		X X X X X X X
    #3 Mathematics 3 Differential Calculus
    Integral Calculus     		X X X X X X X
    #4 Mathematics 4 Differential Equations
    Transforms     		X X X X X X X
    #5 Electrical Circuits 1 Complex Numbers, Electrostatics
    Direct Current Circuits     		X X X X X X
    #6 Electrical Circuits 2 Alternating Current Circuits
    Three-phase Systems, Electronics     		    x     X X
    #7 Computers, Measurement, & Controls Computer Hardware, Software,
    Measurement, Controls     		          X  
    #8 Statics Systems of Forces, Trusses, Pulleys,
    Cables, Friction, Centroids, Inertia     		  X       X X
    #9 Dynamics Kinematics, Kinetics, Kinetics of
    Rotational Motion, Energy, Work     		  X       X X
    #10 Thermodynamics 1 Properties of Substances, First Law
    of Thermodynamics, Power Cycles, Entropy     		X     X   X X
    #11 Thermodynamics 2 Mixtures of Gases, Vapors, & Liquids
    Combustion & Heat Transfer     		X     X   X X
    #12 Fluids Fluid Properties, Fluid Statics,
    Fluid Dynamics, Fluid Measurements     		X X   X   X X
    #13 Mechanics of Materials 1 Stress & Strain
    Thermal, Hoop, & Torsional Stress     		  X       X X
    #14 Mechanics of Materials 2 Beams
    Columns     		  X       X X
    #15 Engineering Economics Cash Flow & Equivalence, Depreciation, Special Topics, Comparisons of Alternatives   X X X X X X

     

    Registration Fees and Form
     

    DVD's

     Number of Lessons Registered For

    Regular Price    

    15 Lessons = 45 hours

    		 $ 540

    14 Lessons = 42 hours

    		 $ 518

    13 Lessons = 39 hours

    		 $ 494

    12 Lessons = 36 hours

    		 $ 468

    11 Lessons = 33 hours

    		  $ 440

    10 Lessons = 30 hours

    		  $ 410

    9 Lessons = 27 hours

    		 $ 378

    8 Lessons = 24 hours

    		 $ 344

    7 Lessons = 21 hours

    		 $ 308

    6 Lessons = 18 hours

    		 $ 270

    5 Lessons = 15 hours

    		 $ 230

    4 Lessons = 12 hours

    		 $ 188

    3 Lessons =  9 hours

    		 $ 144

    2 Lessons =  6 hours

    		 $   98

    1 Lesson =   3 hours

    		 $   50

     

     

     

     

     

     

     

     

     

    Choose Shipping & Handling Option Below and Add the S & H Charges to The Registration Fees

    DVD's (Each lesson includes 2 90-minute DVD's)

    Option 1 - Standard US Postal 7-14 days
         1 lesson $9.00 shipping and handling.  More than 1 lesson?  Then, shipping & handling = $ (8 + n)  where n = number of lessons being shipped.

    Option 2 - Priority US Postal3-4 days
         1 lesson $18.00 shipping and handling.  More than 1 lesson?  Then, shipping & handling = $ (17 + n)  where n = number of lessons being shipped.

    Option 3 - Express US Postal 1-2 days
         1 lesson $26.00 shipping and handling.  More than 1 lesson?  Then, shipping & handling = $ (23 + 3n)  where n = number of lessons being shipped.

     E-327 VIDEO COURSE SECURE Registration Fees and Form
    Shipping Method (Option 1, 2, or 3)
    Total $ (Reg. Fee + S&H)
    The DVD's are copyrighted by Engineering Update Institute.  Like software, you (and only you as a registered individual student) will be licensed to use this material to study for the exam.  The DVD's can not be copied, shared, sold, or purchased.  Such actions violate Federal and International Copyright Law, and offenders will be prosecuted to the full extent of the laws.  Do you accept or decline the terms of the usage of the course material?  Type "Accept" or Decline".
    Name:
    Street Address:
    City:
    State:
    Zip:
    E-Mail:
    Phone:
    Education: Degrees, Universities, Graduation Date:
    Your Field of Engineering: (CE, ME, EE, specify)
    Referred to this website by:
    Credit/Debit Card Type:
    Credit/Debit Card Number:
    Name of Cardholder:
    Exp. Month & Year:

    If you would like to examine a typical DVD before you register for any of the lessons, you can request to see one FREE.

    If you would like to register you can skip this section and proceed to the REGISTRATION section below.

    FREE DVD  Available for Your Examination

    A FREE Examination DVD is currently available for E-327 - General Engineering (non-discipline specific) Review for the FE/EIT Exam, if you are not now registering or have never registered for any EUI lessons previously.

    EUI will send you one FREE DVD of OUR choice for your examination upon request. This is an actual video from the course not an abbreviated or edited version. We ask that you place a $40 "good-faith" deposit on the DVD to cover our costs in case it is not returned within 60 days. Limit: one DVD.

    If you decide to register for the course, you can choose to have the deposit credited towards the registration fee or to have it returned.

    Form for Requesting a FREE DVD Available for Your Examination

    Payment by:
  • Check (EUI, 8N173 Ickenham Lane, Plato Center, IL 60124) or
  • Credit/Debit Cards

    •  SECURE FREE Video for Your Examination Order Form

    If you prefer to call in the credit card number in person, call 1-847-309-5864. By mail, Engineering Update Institute, 8N173 Ickenham Lane, Plato Center, IL 60124
    Name:

    Street Address:

    City:

    State:

    Zip:

    E-Mail:

    Phone:

    Your Field of Engineering:

    E-327 Sample DVD $30.00 deposit

    Shipping & Handling $8.00
    $8.00

    Total

    $38.00

    Credit Card Information

    Credit/Debit Card Type:

    Credit/Debit Card Number:

    Name of Cardholder:

    Exp. Month & Year:

    Department of Professional Engineering


    Copyright (c) 2017 by Gary and Bonnie Blank and Engineering Update Institute. ALL RIGHTS RESERVED. .